top of page



High performance 12v 60ah LiFePO4 Lithium leisure battery with a BMS that supports Series connection and expansion (up to 51.2V) and also supports Parallel expansion of to two batteries


This battery does not have Bluetooth


This is a cyliner cell battery - the benifits of cylinder cells are described below

Cylindrical lithium batteries, as the name suggests, feature electrodes that are encased in a cylindrical cell that is wound very tightly within a specially designed metal casing. This unique makeup helps to minimize the chances that the electrode material inside will break-up, even under the heaviest of use conditions, where cylindrical cells are less likely to bloat, leak, or rupture, and are more resilient to moisture, heat and vibration.


Cylindrical cells can discharge their energy faster than prismatic cells because they have more connections internally per amp-hour (Ah) and therefore cylindrical cells are used more often in high-performance applications.


Issues like mechanical vibrations, thermal cycling from charging and discharging are all things that can affect a battery's lifespan. Therefore, the design of these cylindrical units is intended to help mitigate risk from these and other factors as much as possible.


In a battery pack composed of cylindrical cells, if one cell is damaged, it will not seriously endanger the entire battery pack. 


The round shape attributes to the mechanic stability of the cylinder cell as it allows for even distribution of electrolytes and internal pressure, greatly reducing the chance of cell deformity and electrolyte leaks.


The Cylindrical cell shape leaves gaps when stacked. This creates space for air to circulate and heat to dissipate allowing the battery to maintain safe parameters and optimal performance in hot temperatures.


As you can see from the info above, cell form factor can make a big difference in life expectancy, safety, and budget. Even more so when you are considering a battery for mobile applications such as a Motorhome, Van or Boat. Intense vibrations, bumps, and hot storage compartments such as engine bays are basic conditions a mobile battery must be capable of handling.


This TN battery uses LifePo4 Cylindrical Cells because they provide the best thermal and chemical stability. The LiFePo4 Cylindrical cells are ideal for Motorhomes, Vans and Boats since they provide a constant high-power rating, exceptional cycle life, and superior safety against abusive conditions and extreme operating temperatures. 


- This can be charged using most standard lead-acid chargers, MPPT solar chargers and DC to DC chargers
- These provide significant gains in power density, power delivery and lifetime expentancy
- They offer thousands of charge/discharge cycles
- Light weight - These are about 40-50% lighter than a comparable lead acid battery
- Low temperature charge protection is inbuilt
- They provide 100% depth of discharge (DoD)
- The 100% DOD offers you up to double the useable Ah capacity compared with an equivalent lead-acid battery
- Higher charge acceptance rates allow shorter re-charge times
- These will recharge more quickly from a solar panel than a traditional lead-acid battery
- Maintenance free
- Does not contain any liquids
- Will not sulphate if left discharged - no risk of damage
- No power 'tail-off' - voltage remains relatively constant until almost fully discharged
- Wider temperature operating range 
- The LiFePO4 batteries are the safest type of Lithium battery as they will not overheat, and even if punctured they will not catch fire
- The cathode material in LiFePO4 batteries is not hazardous, and so poses no negative health hazards


- PWM solar controllers are NOT suitable for use with these BMS equipped LiFePO4 batteries
- Your battery can be charged by 99% of all current Lead Acid battery chargers as the charge is controlled by the batteries internal BMS (Battery Management System), However, we advise to use a charger that has either an ‘AGM’ or ‘GEL’ setting, or preferably use a specific Lithium Battery charger which will use the correct profile and charging voltage
- In any fitment where charging is via a dynamo or alternator, it is strongly advised to fit a DCDC charger to control voltage. In systems that use a ‘Smart Alternator’ or where the voltage is above 15v for a 12v system or multiple’s thereafter for series banks, a DC-DC charger MUST be fitted to avoid the BMS shutting down to protect the battery.


- 1x 60ah lithium leisure battery

Nominal Voltage 12.8V
Nominal Capacity 60Ah@0.2C
Energy 768Wh
Internal Resistance 28=mO
Cycle Life >2000 Cycles @ 0.2C Charge/Discharge at 100%DOD,End of Life 70% Capacity.
Self Discharge =3.5% per month at 25OC


Discharging Current 12A
Max. Continuous Current 60A
Max Pulse Current 120A(<3S)
Discharging Cut-off Voltage 10.0V


Charging Voltage 14.0~14.6V
Charging Mode (CC/CV) - At 0OC~45OC temperature, charged to 14.6V at a constant current of 0.2C5A, and then,changed continuously with constant voltage of 14.6V until the current was not more than 0.02C5A.
Charging Current 12A
Max Charging 30A


Cell & Format IFR32700 N60,4S10P
Dimension(L*W*H*TH) 229*138*212*217mm
Weight Approx. 7.2Kg
Terminal M6


Charge Temperature 0OC to 45OC (32OF to 113OF) @60±25% Relative Humidity
Discharge Temperature -20OC to 60OC (-4OF to 140OF) @60±25% Relative Humidity
Storage Temperature 0OC to 45OC (32OF to 113OF) @60±25% Relative Humidity
Water Dust Resistance IP55


PLEASE NOTE: If you have one of the following postcodes then there may be an extra postage charge on top of the cost of the item, depending on the item that you have purchased and the service that we use - We will contact you if there are additional shipping fees to AB, IV, KA, KW, PA, PH, BT, HS, ZE, IM, TR, FK. Please ask for a quote if you are unsure.

TN Power 60ah 12v Lithium Leisure Battery Heavy Duty

£319.99 Regular Price
£297.59Sale Price
  • Returns are accepted if the item is returned within 30 days in the same condition that it was sent out. The buyer pays for return postage and ensures that the item is well packaged for return shipping

bottom of page