top of page

Custom Size CIGS Flexible Solar Panels

Flexible CIGS Solar Panel – Made in the UK

 

These lightweight, peel-and-stick panels are made in the UK using CIGS thin-film cells (copper indium gallium selenide). There's no glass or rigid silicon, so they bend to curved roofs and decks, won't shatter, and are under 3 mm thick once fitted. That means no drilling, no racking and no added wind noise.

​

  • Bypass diodes on every pair of cells. If part of the panel is shaded by a roof vent, aerial or leaves, only that small section stops producing and the rest keeps working. Ordinary crystalline panels can lose much more output from a small shadow.

  • Strong low-light performance. CIGS keeps generating in overcast weather and early or late in the day, when the sun is low.

  • No air gap needed. CIGS doesn't build up much heat, so the panels can be bonded flat to the roof.

  • Self-cleaning ETFE top sheet, with little or no maintenance.

  • Lightweight, at under 3 kg per square metre.

  • Tough. It's safe to walk on carefully (soft shoes recommended) and shatterproof.

  • Junction box on the top as standard. A rear-exit version is available for a flush, cable-free look.

  • Efficiency of 15–18%.

  • Certified to IEC 61646 and IEC 61730.

 

They are available in three widths, 358mm, 674mm and 990mm

 

The maximum length for each width is, 5067mm, 3837mm and 2609mm

 

These have a ‘peel and stick’ installation, they are 1.7mm thick

 

Please enquire for a quote - the lead-time is 6-8 weeks for custom panels

Flexible CIGS solar panel fitted to the deck of a motor cruiser in a marina

C

Copper (Cu) - It possesses exceptionally high electrical and thermal conductivity, second only to silver

Two flexible CIGS solar panels fitted side by side on a narrowboat roof

G

Gallium (Ga) - It possesses excellent light-absorption capabilities and precise bandgap tunability when alloyed into solar semiconductors

Large flexible CIGS solar panel stuck down on a boat roof, with junction boxes at the top edge

I

Indium (In) - It possesses exceptionally high malleability and unique optical transparency when bonded into conductive oxides

Long, narrow custom-size flexible CIGS solar panel installed into a narrow channel

S

Selenium (Se) - Becomes Selenide. It has exceptional photoconductivity and absorbs light up to one hundred times more efficiently than silicon

​These panels work out at approximately £4 per watt 

​

Prices may vary from the table below when a quote is provided due to the ongoing industry and energy price increases

 

The prices in the table below do not include shipping - your postcode is required to provide an accurate quote including shipping

​

Please note that the smaller panels might be rolled and sent in a box, and to avoid stressing large panels, depending on the size, they may be sent on a pallet. In this instance you will need access for a large truck/lorry for delivery

CIGS Custom Panel Inquiry

Fill in the form below to let us know which size panel you're interested in

and how we can help - we'll get back to you as soon as possible.

Which width panel are you interested in?
bottom of page