PLEASE NOTE: This is available to buy through our online store, but it is not available off-the-shelf at our walk-in shop in Cornwall.
ITEM DESCRIPTION
Features
Liquid crystal display
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
--------------------
PACKAGE INCLUDES –
- 10a Victron PWM solar controller
- Installation manual
--------------------
ADDITIONAL NOTES –
Controller specifications:
Voltage - 12/24V
Rated Charge Current - 10A
Bluetooth Enabled - No
Protection Category - IP20
Dimensions - H96 x W169 x D36mm
Weight - 0.15Kg
